-
This is a replacement LCD for PM3 and PM4 monitors. If your LCD is cracked or damaged, you can replace it with this part. Compatible with PM3 and PM4 monitors only. (Also available at concept2.co.uk/support): -
Chain Idler Pulley
-
For use on all BikeErgs. -
BikeERG fit guide/sizing chart LOW seat retrofit assembly – PN 2855. This will change the seat height range to 28.75 in–38 in (73 cm–97 cm). Suitable for inside leg measurements between 26 in–35 in (66 cm–89 cm).u.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
- Adjustable replacement handle (5cm) made from contoured orange rubber. Finger-sized radial contours and brushed texture. Solid, durable material. Available in two diameters: 32mm (thin) or 33.5mm (medium). Available separately.
-
Nut #10 SS (Flywheel cover nut) [for PN1276] -
It's hard. It's black. It's not plastic. That's good. And contains 500,000,000 micro-mililitres of powered up H2O. In other words - it's a 500ml steel bottle for your water. Get one. Forget it somewhere - Buy another. -
FREE SHIPPINGGarmin chest belt for displaying heart rate data on the Performance Monitor. -
The elastic replacement shock cord (or bungee cord) for Slides - two required per slide. -
ROWfit offer the full range of Concept2 Sweep & Sculling Oars along with Swift Racing Sculling oars. We also service and repair all brands of oars to keep you on the water. Contact us at 087 338 3267 or 087 768 0636 to discuss the options available and get blades to match your needs. Here's a handy link to whet your appetite: https://www.concept2.co.uk/oars -
For use with model C, D and E RowErgs. -
For use with RowErgs, Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
For use on SkiErgs manufactured from August 2014–present. Used at the top bracket and frame cap. There are 4 of part PN2834 in the SkiErg. SkiErg Schematics -
For use on all BikeErgs crank arms. Two per crank arm -
For use on all BikeErgs. -
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately) -
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. -
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. -
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. -
6mm L-Key (or Allen Key) for use in assembling and maintaining the Concept 2 BikeERG -
T27 6-Lobe driver required to assemble & tighten most screws and fasteners on Concept 2 machines since 2015. Use only with 6-lobe Torx screws & fasteners. -
For use on all BikeErgs. This is the internal cable and sensor on the BikeErg, that goes from the flywheel to the generator. -
For use on Compression Members with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Four per machine. -
For use with the black SkiErg2 -
For use on all PM4 and PM5 monitors. This thumbscrew enables you to remove the battery door without tools. -
This is a replacement battery door for the PM5. -
5cm adjustment handle without grip cover. For use on sculls and skinny straps with the Concept2 5cm adjustment system. -
For use with the black SkiErg, the SkiErg Handle Hooks attach to both sides of the SkiErg near the monitor and hold the SkiErg handles in place lower on the machine so that the handles are within reach for people using the SkiErg from a wheelchair or seated position. -
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel. -
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel. -
FREE SHIPPINGThe Concept2 StrengthErg is a compact, multifunctional strength training machine. It uses the power of air resistance to deliver a comprehensive and safe workout without the need to deal with weight plates, racks and barbells. You can apply as much or as little force as you want and the StrengthErg will accurately measure and display your result. Our free ErgData app gives you the performance tracking and analysis needed to achieve your goals. -
Our device holder keeps your smartphone or tablet securely in place. Fits everything from small smartphones to large tablets, such as the iPad Pro. Adjusts quickly and easily. Compatible with the SkiErg2 (the black SkiErg manufactured from August 2014 to present). Not included with new SkiErg purchases. SkiErg and floor stand sold separately. Devices not included. -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The BikeERG with Low Seat allows for the standard seat to get 5cm closer to the pedals BikeERG fit guide/sizing chart The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
For use with PM3s and PM4s installed on indoor rowers. The paper-free way to keep track of your training, this smart card captures your workout data directly from the Performance Monitor. NOT COMPATIBLE WITH THE PM5. -
Replacement 5 cm adjustable outside sweep grip made of microfibre suede. For use on Ultralight sweeps that feature the Length Adjustment System. 37 mm diameter. -
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware. -
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG 1299 6 Lobe Screw 1/4 - 20 x 1/2 SS; Used in various places on the Model C, D and E Indoor Rower and BikeERG 1275 Nut, No. 6—D, E, Dynamic and SkiErg. This nut is used with the perf outlet connector. -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower. -
This is the damper-side cover for the Black RowERG, Model D Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). -
SCULL Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
Out of stock
This is the saddle for the BikeERG! -
For use on the black SkiErg manufactured August 2014–present. This is the drive spool (the drive cord is not included). Two drive spools per machine. -
FREE SHIPPINGRetrofit Kit for Model E Rowers Includes: · PM5 Monitor · Two D cell batteries · Device Holder · Monitor arm and hardware -
For use with a PM5, PM4 or PM3, the smartphone holder slides onto the top of the PM to provide a place for your mobile device while using the RowErg, SkiErg or BikeErg. -
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools. -
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools. -
Scull collar for use with green or black Concept2 sleeves. -
Sweep collar for use with green or black Concept2 sleeves.
-
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic -
For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. -
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. -
Replacement grip for sculling oar handles. Made of smooth, black rubber. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
Replacement grip for sculling oar handles. Azure blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
Replacement grip for sculling oar handles. Ice blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10cm adjustable-length handles. -
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
Out of stock
This is the nut that keeps the gate closed on a Concept2 oarlock. Fits scull and sweep oarlocks.
