-
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). -
5cm adjustment handle without grip cover. For use on sculls and skinny straps with the Concept2 5cm adjustment system. -
For use on all PM4 and PM5 monitors. This thumbscrew enables you to remove the battery door without tools. -
BikeERG fit guide/sizing chart LOW seat retrofit assembly – PN 2855. This will change the seat height range to 28.75 in–38 in (73 cm–97 cm). Suitable for inside leg measurements between 26 in–35 in (66 cm–89 cm).u.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The BikeERG with Low Seat allows for the standard seat to get 5cm closer to the pedals BikeERG fit guide/sizing chart The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you.
-
FREE SHIPPINGThe Dynamic Indoor Rower offers the closest simulation to rowing on the water and was developed to meet the specific training needs of the competitive rowing athlete. Unlike the Model D and E Indoor Rowers, the footrest on the Dynamic is free to move and there’s minimal movement of body mass throughout the stroke. The Dynamic demands similar concentration and body control to that needed when rowing in a boat, making it an excellent sport-specific training and coaching tool. Using the Dynamic Link accessory it’s easy to join together two or more Dynamics, so you can train as a team boat. If you’re looking to move faster on the water, the Dynamic is what you’ve been waiting for.Warranty
The Concept2 Dynamic Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: Dynamic Indoor Rower Warranty(PDF) -
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic -
Out of stock
Concept 2 Sculling oarlock -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). Long recognised as delivering one of the toughest workouts around, Nordic skiing develops both strength and endurance and exercises the legs as well as the arms and core. The SkiErg can be used for both double pole and classic alternating arm technique. The SkiErg uses the same flywheel resistance and electronic monitoring systems as our indoor rower, the proven choice of rowing athletes around the world since 1981, so you can rest assured that the machine is made to last. As well as being durable and well built, the SkiErg is sophisticated too, with an advanced monitor that provides immediate, accurate performance data. Whether you’re an elite cross-country skier looking to improve your poling power, a weekend enthusiast wanting to get into shape for the ski season, or just someone looking for a great workout, the SkiErg will help you achieve your goals.Included with Your Purchase
We include the following items with your SkiErg PM5 purchase:- PM5 Performance Monitor with Quick Start Guide
- SkiErg Product Manual
- Tools and illustrated assembly instructions
Warranty
The Concept2 SkiERG is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: SkiErg Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING when purchased with the SkiERG P/N 2715 For use with the black SkiERG, the floor stand provides an alternative method of supporting the SkiERG if wall mounting is not an option. It makes the SkiERG free standing, allowing you to use the SkiERG anywhere. ***SkiERG sold separately.*** -
For use on all BikeErgs. -
FREE SHIPPINGThe Concept2 StrengthErg is a compact, multifunctional strength training machine. It uses the power of air resistance to deliver a comprehensive and safe workout without the need to deal with weight plates, racks and barbells. You can apply as much or as little force as you want and the StrengthErg will accurately measure and display your result. Our free ErgData app gives you the performance tracking and analysis needed to achieve your goals. -
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. -
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately) -
6mm L-Key (or Allen Key) for use in assembling and maintaining the Concept 2 BikeERG -
For use on all BikeErgs. This is the internal cable and sensor on the BikeErg, that goes from the flywheel to the generator. -
For use on all BikeErgs. -
For use on all BikeErgs crank arms. Two per crank arm -
For use with model C, D and E RowErgs. -
Chain Idler Pulley
-
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
This is the damper-side cover for the Black RowERG, Model D Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower. -
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Four per machine. -
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel. -
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with RowErgs, Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
Nut #10 SS (Flywheel cover nut) [for PN1276] -
Out of stock
This is the nut that keeps the gate closed on a Concept2 oarlock. Fits scull and sweep oarlocks. -
For use on SkiErgs manufactured from August 2014–present. Used at the top bracket and frame cap. There are 4 of part PN2834 in the SkiErg. SkiErg Schematics -
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. -
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. -
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware. -
For use on Compression Members with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG 1299 6 Lobe Screw 1/4 - 20 x 1/2 SS; Used in various places on the Model C, D and E Indoor Rower and BikeERG 1275 Nut, No. 6—D, E, Dynamic and SkiErg. This nut is used with the perf outlet connector. -
One full rake of scull bushings for 13mm pins. Bushings are sold in units called rakes. Each rake of pitch bushings is enough for two oarlocks. Bushings allow for pitch adjustment anywhere from one to seven degrees. -
SCULL Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
The elastic replacement shock cord (or bungee cord) for Slides - two required per slide. -
For use with a PM5, PM4 or PM3, the smartphone holder slides onto the top of the PM to provide a place for your mobile device while using the RowErg, SkiErg or BikeErg. -
SWEEP Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
T27 6-Lobe driver required to assemble & tighten most screws and fasteners on Concept 2 machines since 2015. Use only with 6-lobe Torx screws & fasteners. -
Out of stock
This is the saddle for the BikeERG! -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) Includes PM5 and Device Holder. The dependable performance of the Concept 2 RowERG with standard legs (formerly Model D) has made it the best selling indoor rower in the world. Recognized by competitive rowers as the standard for indoor training, the RowERG with Standard legs delivers an effective cardiovascular workout that will increase your fitness level and tone your physique. At a fraction of the cost of other home fitness equipment or a yearly gym membership, you can have the luxury of working out in your home whenever you choose…and get a great workout to boot. We value practical design: the RowERG is efficiently engineered and will last a lifetime. It is the same machine used by Olympic- and elite-level athletes to train for their sport—it’ll take the abuse of heavy training day after day. If you’re looking for a solid piece of exercise equipment at a great value, the RowERG is the perfect choice.Warranty
The Concept2 RowERG Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: RowErg, Model D and Model E Indoor Rower Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order). Includes PM5 and Device Holder. The dependable performance of the Concept 2 Model D RowErg has made it the best selling indoor rower in the world. Recognized by competitive rowers as the standard for indoor training, the Model D delivers an effective cardiovascular workout that will increase your fitness level and tone your physique. At a fraction of the cost of other home fitness equipment or a yearly gym membership, you can have the luxury of working out in your home whenever you choose…and get a great workout to boot. We value practical design: the Model D is efficiently engineered and will last a lifetime. The Model D you buy is the same machine used by Olympic- and elite-level athletes to train for their sport—it’ll take the abuse of heavy training day after day. If you’re looking for a solid piece of exercise equipment at a great value, the Model D is the perfect choice. NEW: The Concept2 RowErg is available with either standard or tall legs. The standard legs give a 14 inch (36 cm) seat height while the taller legs make the seat 20 inches (51 cm) from the floor. The tall leg option replaces the Model E, which is now discontinued. A higher seat is not required for taller users, and both machines will fit inseams up to 38 inches (96.5 cm). Rowers with an inseam longer than this may require an extra-long monorail. The tall legs are also available as a separate retrofit kit.Warranty
The Concept2 RowERG with Tall Legs Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: RowErg, Model D and Model E Indoor Rower Warranty(PDF) -
It's hard. It's black. It's not plastic. That's good. And contains 500,000,000 micro-mililitres of powered up H2O. In other words - it's a 500ml steel bottle for your water. Get one. Forget it somewhere - Buy another. -
For use on the black SkiErg manufactured August 2014–present. This is the drive spool (the drive cord is not included). Two drive spools per machine. -
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG. -
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. -
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24"
instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually. -
FREE SHIPPINGGarmin chest belt for displaying heart rate data on the Performance Monitor. -
Replacement sensor unit and housing for the BikeERG -
- Adjustable replacement handle (5cm) made from contoured orange rubber. Finger-sized radial contours and brushed texture. Solid, durable material. Available in two diameters: 32mm (thin) or 33.5mm (medium). Available separately.
-
- Adjustable replacement handle (5cm) made from contoured orange rubber. Finger-sized radial contours and brushed texture. Solid, durable material. Available in two diameters: 32mm (thin) or 33.5mm (medium). Available separately.
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
FREE SHIPPINGFREE SHIPPING The Indoor Rower Floor Mat is made out of 3/16 inch (4.5 mm) thick black synthetic rubber (PVC) and measures 8.2 feet by 2.6 feet (250 cm by 80 cm). The mat can be used on any surface and helps protect the floor as well as eliminate slippage. PLEASE Note: When ordered with a RowERG, the mat will arrive by a separate courier. -
For use with PM3s and PM4s installed on indoor rowers. The paper-free way to keep track of your training, this smart card captures your workout data directly from the Performance Monitor. NOT COMPATIBLE WITH THE PM5.
