-
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you. -
FREE SHIPPINGThe Dynamic Indoor Rower offers the closest simulation to rowing on the water and was developed to meet the specific training needs of the competitive rowing athlete. Unlike the Model D and E Indoor Rowers, the footrest on the Dynamic is free to move and there’s minimal movement of body mass throughout the stroke. The Dynamic demands similar concentration and body control to that needed when rowing in a boat, making it an excellent sport-specific training and coaching tool. Using the Dynamic Link accessory it’s easy to join together two or more Dynamics, so you can train as a team boat. If you’re looking to move faster on the water, the Dynamic is what you’ve been waiting for.Warranty
The Concept2 Dynamic Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: Dynamic Indoor Rower Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) Includes PM5 and Device Holder. The dependable performance of the Concept 2 RowERG with standard legs (formerly Model D) has made it the best selling indoor rower in the world. Recognized by competitive rowers as the standard for indoor training, the RowERG with Standard legs delivers an effective cardiovascular workout that will increase your fitness level and tone your physique. At a fraction of the cost of other home fitness equipment or a yearly gym membership, you can have the luxury of working out in your home whenever you choose…and get a great workout to boot. We value practical design: the RowERG is efficiently engineered and will last a lifetime. It is the same machine used by Olympic- and elite-level athletes to train for their sport—it’ll take the abuse of heavy training day after day. If you’re looking for a solid piece of exercise equipment at a great value, the RowERG is the perfect choice.Warranty
The Concept2 RowERG Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: RowErg, Model D and Model E Indoor Rower Warranty(PDF) -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) This product is for the Concept2 RowERG. Select the link for BikeERG or SkiERG [The PM5 default setup is for Model D/E/RowERG. It requires a pre-dispatch programming adjustment to use with BikeERG or SkiERG] Model D, Model E, and Dynamic Indoor Rowers from October 2014 to present SkiErgs from September 2014 to present Retrofittable to all older Concept2 Indoor Rowers, BikeERGS and SkiERGs -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). Long recognised as delivering one of the toughest workouts around, Nordic skiing develops both strength and endurance and exercises the legs as well as the arms and core. The SkiErg can be used for both double pole and classic alternating arm technique. The SkiErg uses the same flywheel resistance and electronic monitoring systems as our indoor rower, the proven choice of rowing athletes around the world since 1981, so you can rest assured that the machine is made to last. As well as being durable and well built, the SkiErg is sophisticated too, with an advanced monitor that provides immediate, accurate performance data. Whether you’re an elite cross-country skier looking to improve your poling power, a weekend enthusiast wanting to get into shape for the ski season, or just someone looking for a great workout, the SkiErg will help you achieve your goals.Included with Your Purchase
We include the following items with your SkiErg PM5 purchase:- PM5 Performance Monitor with Quick Start Guide
- SkiErg Product Manual
- Tools and illustrated assembly instructions
Warranty
The Concept2 SkiERG is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: SkiErg Warranty(PDF) -
FREE SHIPPINGIf you already have a pair of Concept2 Slides and want to be able to link two or more indoor rowers together to simulate a "double" for great team training, you can purchase a spare slide (one slide, as pictured). -
FREE SHIPPINGAdd that on-the-water feel to your Model A, B, C, D, E or RowERG Indoor Rower with the Concept2 Slide! -
FREE SHIPPINGFREE SHIPPING The Indoor Rower Floor Mat is made out of 3/16 inch (4.5 mm) thick black synthetic rubber (PVC) and measures 8.2 feet by 2.6 feet (250 cm by 80 cm). The mat can be used on any surface and helps protect the floor as well as eliminate slippage. PLEASE Note: When ordered with a RowERG, the mat will arrive by a separate courier. -
FREE SHIPPINGFREE SHIPPING when purchased with the SkiERG P/N 2715 For use with the black SkiERG, the floor stand provides an alternative method of supporting the SkiERG if wall mounting is not an option. It makes the SkiERG free standing, allowing you to use the SkiERG anywhere. ***SkiERG sold separately.*** -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order). Includes PM5 and Device Holder. The dependable performance of the Concept 2 Model D RowErg has made it the best selling indoor rower in the world. Recognized by competitive rowers as the standard for indoor training, the Model D delivers an effective cardiovascular workout that will increase your fitness level and tone your physique. At a fraction of the cost of other home fitness equipment or a yearly gym membership, you can have the luxury of working out in your home whenever you choose…and get a great workout to boot. We value practical design: the Model D is efficiently engineered and will last a lifetime. The Model D you buy is the same machine used by Olympic- and elite-level athletes to train for their sport—it’ll take the abuse of heavy training day after day. If you’re looking for a solid piece of exercise equipment at a great value, the Model D is the perfect choice. NEW: The Concept2 RowErg is available with either standard or tall legs. The standard legs give a 14 inch (36 cm) seat height while the taller legs make the seat 20 inches (51 cm) from the floor. The tall leg option replaces the Model E, which is now discontinued. A higher seat is not required for taller users, and both machines will fit inseams up to 38 inches (96.5 cm). Rowers with an inseam longer than this may require an extra-long monorail. The tall legs are also available as a separate retrofit kit.Warranty
The Concept2 RowERG with Tall Legs Indoor Rower is backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: RowErg, Model D and Model E Indoor Rower Warranty(PDF) -
FREE SHIPPINGRetrofit Kit for Model C and D Rowers Includes: · PM5 Monitor · Two D cell batteries · Smartphone cradle · Monitor arm and hardware -
FREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject of RowERGs and Tall legs -
For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. Important Note: This is the double coil generator sensor for Model D/E machines made after October 2006. For machines made before then, you will need to replace the entire Power Generator Assembly -
FREE SHIPPING For use with RowERG, Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. If your monitor lights up with zeros, but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part. Replacement Instructions (also available at concept2.co.uk/service): -
FREE SHIPPINGFREE SHIPPING Aimed at adaptive athletes, the Concept2 Tractor Seat is an alternative sliding seat available for Concept2 Indoor Rowers Models A, B, C, D, E and RowERG Standard & Tall Legs. It features:- A wider, more stable base for people who need more support while rowing.
- A larger size that makes getting on and off the indoor rower easier.
- Easy installation using thumb screws.
-
For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. -
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Adjustable replacement handle (5cm) made from contoured orange rubber. Finger-sized radial contours and brushed texture. Solid, durable material. Available in two diameters: 32mm (thin) or 33.5mm (medium). Available separately.
-
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf -
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24"
instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually. -
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. -
This is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery. -
For use with Model C, D and E Indoor Rowers & RowERG. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. -
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). -
The Oar Rigging Tool includes the following:- T20 Torx Driver for adjusting:
- The grip clamp screw
- The length adjustment screw on suede scull grips
- 6 mm Hex Nut Driver, for adjusting the length adjustment screws on adjustable grips (excluding the suede scull grip)
- #2 Phillips Bit for adjusting:
- Older grip clamp screws
- Length on older oars
- 5/16" Hex Nut Driver for adjust the collar band clamp
- T20 Torx Driver for adjusting:
-
Out of stock
FREE SHIPPINGThe Polar H9 chest strap (65-107cm) offers reliable and high-quality heart rate measurement. It supports all common transmission technologies. That would be Bluetooth, ANT+ and analog 5kHz technology. PM5 Monitor: The Polar H9 can be paired with the PM5 monitor either via Bluetooth or via ANT+. Scope of delivery:- Polar H9 heart rate sensor
- Polar Soft Strap
- Polar H9 quick guide
-
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. -
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG. -
This is a replacement LCD and housing front for the PM5 monitor. If your LCD is cracked or damaged, you can replace it with this replacement part. Compatible with PM5 monitors only. PM5 LCD Replacement Instructions -
Replacement sensor unit and housing for the BikeERG -
This is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only. -
This is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only. -
For use on all Model C, D and E Indoor Rowers. This swivel bushing is installed at the swivel/handle end of the chain to prolong chain life and provide smoother rowing. See more info. -
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
Used in various places with Model D and Model E Indoor Rowers manufactured from August 2006–present. -
Out of stock
Concept 2 Sculling oarlock -
One full rake of scull bushings for 13mm pins. Bushings are sold in units called rakes. Each rake of pitch bushings is enough for two oarlocks. Bushings allow for pitch adjustment anywhere from one to seven degrees. -
SWEEP Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
Out of stock
This is the nut that keeps the gate closed on a Concept2 oarlock. Fits scull and sweep oarlocks. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
Replacement grip for sculling oar handles. Ice blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10cm adjustable-length handles. -
Replacement grip for sculling oar handles. Azure blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
Replacement grip for sculling oar handles. Made of smooth, black rubber. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. -
For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. -
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic -
Sweep collar for use with green or black Concept2 sleeves. -
Scull collar for use with green or black Concept2 sleeves.
-
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools.
