-
Scull collar for use with green or black Concept2 sleeves. -
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel. -
Replacement 5 cm adjustable outside sweep grip made of microfibre suede. For use on Ultralight sweeps that feature the Length Adjustment System. 37 mm diameter. -
Out of stock
FREE SHIPPINGThe Polar H9 chest strap (65-107cm) offers reliable and high-quality heart rate measurement. It supports all common transmission technologies. That would be Bluetooth, ANT+ and analog 5kHz technology. PM5 Monitor: The Polar H9 can be paired with the PM5 monitor either via Bluetooth or via ANT+. Scope of delivery:- Polar H9 heart rate sensor
- Polar Soft Strap
- Polar H9 quick guide
-
FREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject of RowERGs and Tall legs -
For use on Compression Members with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
Replacement grip for sculling oar handles. Made of smooth, black rubber. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
For use on SkiErgs manufactured from August 2014–present. Used at the top bracket and frame cap. There are 4 of part PN2834 in the SkiErg. SkiErg Schematics -
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. -
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG. -
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
For use on all BikeErgs crank arms. Two per crank arm -
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The BikeERG with Low Seat allows for the standard seat to get 5cm closer to the pedals BikeERG fit guide/sizing chart The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools. -
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
For use on all BikeErgs. This is the internal cable and sensor on the BikeErg, that goes from the flywheel to the generator. -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower. -
Sweep collar for use with green or black Concept2 sleeves.
-
For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. -
For use on all BikeErgs. -
Chain Idler Pulley
-
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
One full rake of scull bushings for 13mm pins. Bushings are sold in units called rakes. Each rake of pitch bushings is enough for two oarlocks. Bushings allow for pitch adjustment anywhere from one to seven degrees. -
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
It's hard. It's black. It's not plastic. That's good. And contains 500,000,000 micro-mililitres of powered up H2O. In other words - it's a 500ml steel bottle for your water. Get one. Forget it somewhere - Buy another. -
FREE SHIPPINGGarmin chest belt for displaying heart rate data on the Performance Monitor. -
For use with model C, D and E RowErgs. -
T27 6-Lobe driver required to assemble & tighten most screws and fasteners on Concept 2 machines since 2015. Use only with 6-lobe Torx screws & fasteners. -
For use with PM3s and PM4s installed on indoor rowers. The paper-free way to keep track of your training, this smart card captures your workout data directly from the Performance Monitor. NOT COMPATIBLE WITH THE PM5. -
FREE SHIPPINGRetrofit Kit for Model E Rowers Includes: · PM5 Monitor · Two D cell batteries · Device Holder · Monitor arm and hardware -
Replacement grip for sculling oar handles. Azure blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
FREE SHIPPINGIf you already have a pair of Concept2 Slides and want to be able to link two or more indoor rowers together to simulate a "double" for great team training, you can purchase a spare slide (one slide, as pictured). -
This is a replacement LCD for PM3 and PM4 monitors. If your LCD is cracked or damaged, you can replace it with this part. Compatible with PM3 and PM4 monitors only. (Also available at concept2.co.uk/support): -
For use on all BikeErgs. -
BikeERG fit guide/sizing chart LOW seat retrofit assembly – PN 2855. This will change the seat height range to 28.75 in–38 in (73 cm–97 cm). Suitable for inside leg measurements between 26 in–35 in (66 cm–89 cm).u.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
6mm L-Key (or Allen Key) for use in assembling and maintaining the Concept 2 BikeERG -
5cm adjustment handle without grip cover. For use on sculls and skinny straps with the Concept2 5cm adjustment system. -
Our device holder keeps your smartphone or tablet securely in place. Fits everything from small smartphones to large tablets, such as the iPad Pro. Adjusts quickly and easily. Compatible with the SkiErg2 (the black SkiErg manufactured from August 2014 to present). Not included with new SkiErg purchases. SkiErg and floor stand sold separately. Devices not included. -
This is the damper-side cover for the Black RowERG, Model D Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276).
