Spare parts for Oars, RowERGs, BikeERGs and SkiERGs
-
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG 1299 6 Lobe Screw 1/4 - 20 x 1/2 SS; Used in various places on the Model C, D and E Indoor Rower and BikeERG 1275 Nut, No. 6—D, E, Dynamic and SkiErg. This nut is used with the perf outlet connector. 1279 Screw, Panhead Phillips No. 8 x 1 -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) This product is for the Concept2 RowERG. Select the link for BikeERG or SkiERG [The PM5 default setup is for Model D/E/RowERG. It requires a pre-dispatch programming adjustment to use with BikeERG or SkiERG] Model D, Model E, and Dynamic Indoor Rowers from October 2014 to present SkiErgs from September 2014 to present Retrofittable to all older Concept2 Indoor Rowers, BikeERGS and SkiERGs -
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics. -
For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. Important Note: This is the double coil generator sensor for Model D/E machines made after October 2006. For machines made before then, you will need to replace the entire Power Generator Assembly -
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. -
Out of stock
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight. -
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf -
This is a replacement LCD and housing front for the PM5 monitor. If your LCD is cracked or damaged, you can replace it with this replacement part. Compatible with PM5 monitors only. PM5 LCD Replacement Instructions -
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
FREE SHIPPING Aimed at adaptive athletes, the Concept2 Tractor Seat is an alternative sliding seat available for Concept2 Indoor Rowers Models A, B, C, D, E and RowERG Standard & Tall Legs. It features:- A wider, more stable base for people who need more support while rowing.
- A larger size that makes getting on and off the indoor rower easier.
- Easy installation using thumb screws.
-
Out of stock
This is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only. -
FREE SHIPPING For use with RowERG, Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. If your monitor lights up with zeros, but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part. Replacement Instructions (also available at concept2.co.uk/service): -
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG. -
For use on SkiErgs manufactured from August 2014–present. Used at the top bracket and frame cap. There are 4 of part PN2834 in the SkiErg. SkiErg Schematics -
Out of stock
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. -
Out of stock
FREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject of RowERGs and Tall legs -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower. -
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws. -
Out of stock
For use with RowErg, Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.