-
Fold-able steel trestles (slings) for 4x+ and 8+ (pair) Material: coated steel; approx total weight per trestle: 8 kg -
Black hatch - 135mm (inner part only) Material: Nylon -
Carbon fin for Coastal CO1x & Co2x- 80mm (Beach Sprint fin) 160mm
- 160mm
- 205mm
-
Velcro straps for Flexfeet (includes 1 of 73E Quick Release cord with pull tab) -
Flexfeet - Incl 2 of Str70A (heel piece), 2 of 70B (toe piece), 1 of 73Db (Velcro strap bow side),1 of 73Ds (Velcro strap stroke side), 1 of 73e (quick release cord and tab) per pair -
Tbolt6x30 M6x30mm T bolt (attach stretcher pipe to stretcher track + Coastal Cox seat to track) Plate dimensions 24mm x 10mm Material: SS304 -
Tbolt6x45
- M6x45mm T bolt (attach base of stretcher to stretcher track)
- Plate dimensions 24mm x 10mm
- Material: SS304
-
WashPla6W- Wide 6mm plain washer
- Material: SS304/SS316
-
Out of stock
M6 Spring Washer -
M5 T-Bolts in various lengths - used for seat rails on various decks -
NutHex6- 10mm rigger nut
- M6 - 6mm hex nut
- Material: SS316
-
ScrHex6x30- M6x30mm (attach wing rigger topstays to boat)
- Material: SS316
-
ScrHex6x40
- M6x40mm
- Material: SS316
-
ScrHex6x40
- M6x40mm
- Material: SS316
-
WashPlaM8
- M8 plain washer
- Material: SS304/SS316
-
-
ScrPan6x20- M6x20mm pan screw, posi + (for seat wheel Sea12)
- Material: SS304
-
‘C’ bracket for Al. back rigger, incl o of Rig9B, 2 of ScreHex6x20 (adjustable pitch type) for 110mm shaft -
....it's a bow ball! -
Bow Ball (Large) For Gigs and larger boats Material: Rubber -
Swift Racing shoes (Str62A-**) have black mesh uppers for improved aeration and drying properties. There are 3 black webbing straps on both sides that connect to the 3 Velcro straps for personal fitting and durability. The sole has a rectangular hole pattern of 35mm across, 25mm down, used for fixing shoes to Swift footplates, plus 3 additional holes that can be used for attaching shoes directly to stretchers. Also supplied:- 5mm screws (Part code ScrC/S5x10)
- heel restraint cord (Dyneema 3mm x 50cm; Part code Str64a)
PLEASE NOTE: THE FIXING HOLE PATTERN ON THE SOLE IS UNIQUE TO SWIFT FOOTPLATES.
Footplates for NON-SWIFT boats (270mm wide with 250mm stretcher mounting holes Str32-270 Please contact us if unsure at info@rowfit.ie -
Str31A and 33A have 1 row of 5 holes down the center. And any 2 of these holes can be used to attach the shoe plate to the stretcher. As there are no holes on the outside edges of the shoe plates, shoes are positioned wider than with most other makes of boats, which allows more comfort and better application of power. The product number indicates the width of the stretcher. Str 31A has the rectangular hole pattern of 35mm across x 25mm down to take Swift shoes. As well as the ability to move the shoe plate on the stretcher board, shoes can also be attached in one of 3 positions, high, medium, low, to allow for greater adjustment of shoe height. Hard anodised aluminium. Shoe plate for Swift shoes Aluminium - hard anodised -
Footplates for Swift shoes for non-swift boats (mounting on 250mm width stretcher pegs) These footplates will fit some boats but not all - drop a line or call us for more information. -
ScrC/S5x10- M5x10mm C/S screw, posi + (attach shoe to shoe plate)
-
C’ shape spacer for 13mm pin. 5mm - White or yellow -
C’ shape spacer for 13mm pin. 7mm - White or yellow -
“O” shape spacer for 13mm diameter pin (1mm thick) Material: Nylon -
“O” shape spacer for 13mm diameter pin (2mm thick) Material: Nylon
-
Below Canvas: Large size rudder for rivers and lake steering (rudder blade 100mm x 80mm). Fin3 is used for Swift boats built after April 2009 Material: Stainless Above Canvas: Large size rudder for rivers and lake steering (rudder blade 100mm x 80mm) Fin1 was used on all Swift boats built before March 2009 with the rudder yoke above the canvas deck. Material: Stainless -
Below Canvas: Standard size rudder for multi-lane steering (rudder blade 80mm x 50mm). Fin3 is used for Swift boats built after April 2009 Material: Stainless Above Canvas: Standard size rudder for multi-lane steering (rudder blade 80mm x 50mm). Fin1 was used on all Swift boats built up to March 2009 with the rudder yoke above the canvas deck. Material: Stainless
