-
Wing6nyB 6mm nlyon wing nut - designed for ease of use in most M6 nut roles without the need for a 10 mil or sharp edges.- (attach shoe plate to stretcher)
- (attach stretcher pipe to stretcher tracks)
- (attach wing riggers and CO folding riggers to saxlips)
- (attached Gigs & CO coxed seat to boats)
- (attached float arms to PR floats)
- (attach bow coxed headrest pipes to tracks)
-
Bow Wing rigger/Wing rigger (also fits traditional side-rigged boats)/ Material: Padded Nylon Numbers in brackets show total cover length and distance from back edge of rudder/fin to tip of stern. Example (795cm/105cm). The pocket for fin/rudder is 30cm long. Boat covers are designed to protect your boat during transport and indoor storage, they are padded but are not waterproof and are not recommended for long-term outdoor storage. These covers are designed for Swift Racing boats but may fit other makes of boat. Riggers need to be removed to close the cover completely. Numbers in brackets show total cover length and distance from back edge of rudder/fin to tip of stern. Example (795cm/105cm). The pocket for fin/rudder is 30cm long.P/N Boat cover for 1s - Bow Wing Rigger BC103RW BC103RW 103-RW (830cm/110cm) BC104RW BC104RW 104-RW (800cm/103cm) BC107RW BC107RW 107-RW (778cm/114cm BC111RW BC111RW 111-RW (821cm/115cm BC121RW BC121RW 121-RW (745cm) BC122RW BC122RW 122-RW (802cm/113cm) BC123RW BC123RW 123-RW (805cm) BC124RW BC124RW 124-RW (804cm/116cm) BC125RW BC125RW 125-RW (826cm/111cm Boat cover for 1s - Stern Wing Rigger BC103W BC103W 103-/W - wing rigger (830cm/110cm) BC104W BC104W 104-/W - wing rigger (800cm/103cm) BC105W BC105W 105-/W - wing rigger (790cm/110cm) BC107W BC107W 107-/W - wing rigger (778cm/114cm BC201T Boat covers for 2s - Traditional rigger BC206W Boat covers for 2s - Wing rigger BC8CT-317-557 Boat covers for 8s - Traditional Rigger, 6/7 Section BC8ST-315-549 Boat covers for 8s - Traditional Rigger, Mid Section BC8SW318-561 Boat covers for 8s - Wing Rigger, 6/7 Section BC8CW-316-553 Boat covers for 8s - Wing Rigger, Mid Section BC4T+S-308-522 Boat covers for COXED 4s - Traditional Rigger, Stern Cox BC4T+S-308-506 Boat covers for COXED 4s - Traditional Rigger, Bow Cox BC4W+B-305-510 Boat covers for COXED 4s - Wing Rigger, Bow Cox BC4W+S-309-526 Boat covers for COXED 4s - Wing Rigger, Stern Cox BC4T-300-477 Boat covers for COXLESS 4s - traditional rigger BC4W-301-483 Boat covers for COXLESS 4s - Wing Rigger -
Out of stock
M6 Spring Washer -
WashPlaM8- M8 plain washer
- Material: SS304/SS316
-
WashPla6W
- Wide 6mm plain washer
- Material: SS304/SS316
-
NutTube6x40- Short tube nut (for stretcher T bolt excepts 1s) (attach shoe plate to stretcher except 1s)
- Material: SS304
-
Fold-able steel trestles (slings) for 4x+ and 8+ (pair) Material: coated steel; approx total weight per trestle: 8 kg -
Tre61can- Replacement canvas for Tre61cm for steel 61cm trestles only
- For aluminium trestles replacement canvas is Tre61AcanB
- Length: 75cm
- Material: Nylon
-
Foldable STEEL trestles (slings) for 1s and 2s (each set includes a pair of trestles) Material: Painted Steel (approx total weight per trestle: 4.6kg) When the canvas on your Swift trestles (slings) has become worn, or damaged, they can be replaced with Tre61can (for small trestles) and Tre86can (for large trestles). -
Foldable aluminium trestles (slings) for 1s and 2s (each set includes a pair of trestles) Material: aluminium (approx total weight per trestle: 2.6kg) When the canvas on your Swift trestles (slings) has become worn, or damaged, they can be replaced with Tre61can (for small trestles) and Tre86can (for large trestles). -
Short trestles for 1x and 2x (each set includes a pair of trestles) 44cm high Material: Painted Steel -
Tre86can
- Replacement canvas for Tre86cm, Tre86cmA and Tre78cm
- Length: 88cm
- Material: Nylon
-
Foldable aluminium trestles (slings) for 4s and 8s (each set includes a pair of trestles) Material: aluminium (approx total weight per trestle: 2.6kg) When the canvas on your Swift trestles (slings) has become worn, or damaged, they can be replaced with Tre61can (for small trestles) and Tre86can (for large trestles).
-
Flat type track runner for keel - shark tooth Material: Nylon -
Tbolt6x45- M6x45mm T bolt (attach base of stretcher to stretcher track)
- Plate dimensions 24mm x 10mm
- Material: SS304
-
Tbolt6x30 M6x30mm T bolt (attach stretcher pipe to stretcher track + Coastal Cox seat to track) Plate dimensions 24mm x 10mm Material: SS304
-
M5 T-Bolts in various lengths - used for seat rails on various decks -
Stretcher track, shark tooth type - 350mm Material: Nylon -
Stretcher track, shark tooth type - 250mm Material: Nylon
-
FREE SHIPPINGFor use on Swift Racing Coastal boats. Includes 3.5 meters of bungee cord -
10mm Rigger biscuits -
Soft Handled Nut Driver- 13mm Nut Driver Soft Handle
- M8
- Material: stainless
-
Soft Handled Nut Driver- 10mm Nut Driver Soft Handle
- M6
- Material: stainless
-
- Sleeve - scullIncludes Screws 7 of TapC/S3x12 Light Grey RAL7040
-
Swift Racing shoes (Str62A-**) have black mesh uppers for improved aeration and drying properties. There are 3 black webbing straps on both sides that connect to the 3 Velcro straps for personal fitting and durability. The sole has a rectangular hole pattern of 35mm across, 25mm down, used for fixing shoes to Swift footplates, plus 3 additional holes that can be used for attaching shoes directly to stretchers. Also supplied:- 5mm screws (Part code ScrC/S5x10)
- heel restraint cord (Dyneema 3mm x 50cm; Part code Str64a)
PLEASE NOTE: THE FIXING HOLE PATTERN ON THE SOLE IS UNIQUE TO SWIFT FOOTPLATES.
Footplates for NON-SWIFT boats (270mm wide with 250mm stretcher mounting holes Str32-270 Please contact us if unsure at info@rowfit.ie -
Footplates for Swift shoes for non-swift boats (mounting on 250mm width stretcher pegs) These footplates will fit some boats but not all - drop a line or call us for more information. -
Str31A and 33A have 1 row of 5 holes down the center. And any 2 of these holes can be used to attach the shoe plate to the stretcher. As there are no holes on the outside edges of the shoe plates, shoes are positioned wider than with most other makes of boats, which allows more comfort and better application of power. The product number indicates the width of the stretcher. Str 31A has the rectangular hole pattern of 35mm across x 25mm down to take Swift shoes. As well as the ability to move the shoe plate on the stretcher board, shoes can also be attached in one of 3 positions, high, medium, low, to allow for greater adjustment of shoe height. Hard anodised aluminium. Shoe plate for Swift shoes Aluminium - hard anodised -
Footplate for Active Tool shoes to be fitted in Swift Racing boats
