-
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you. -
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG 1299 6 Lobe Screw 1/4 - 20 x 1/2 SS; Used in various places on the Model C, D and E Indoor Rower and BikeERG 1275 Nut, No. 6—D, E, Dynamic and SkiErg. This nut is used with the perf outlet connector. -
FREE SHIPPINGFREE SHIPPING The BikeErg Floor Mat is made out of 4.5 mm thick black rubber and measures 150 cm by 80 cm. The mat can be used on any surface and helps protect the floor as well as eliminate slippage Note: When ordered with a BikeERG, the mat may arrive by separate courier. -
For use on all PM4 and PM5 monitors. This thumbscrew enables you to remove the battery door without tools. -
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Four per machine. -
FREE SHIPPINGThe Concept2 StrengthErg is a compact, multifunctional strength training machine. It uses the power of air resistance to deliver a comprehensive and safe workout without the need to deal with weight plates, racks and barbells. You can apply as much or as little force as you want and the StrengthErg will accurately measure and display your result. Our free ErgData app gives you the performance tracking and analysis needed to achieve your goals. -
This is a replacement battery door for the PM5. -
Out of stock
This is the saddle for the BikeERG! -
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. -
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. -
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately) -
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. -
For use on Compression Members with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
FREE SHIPPINGFREE SHIPPING Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The BikeERG with Low Seat allows for the standard seat to get 5cm closer to the pedals BikeERG fit guide/sizing chart The Concept2 BikeErg is the latest addition to the Concept 2 family of sport-based ergometers. The BikeErg has the same flywheel and Performance Monitor as Concept2 Indoor Rowers and SkiErgs, bringing to cycling the strengths and features we've previously brought to rowing and cross-country skiing. The flywheel uses air resistance to create a smooth, quiet ride that responds to your efforts. The damper is your "gearing", allowing you to adjust the feel of your ride. Unlike most stationary bikes, the BikeErg has a clutch, so just like a real bike, when you stop pedaling, the flywheel keeps on spinning. The powerful performance monitor connects via Bluetooth to a variety of apps, including the free app ErgData or third-party apps like Zwift. The BikeErg comes with an integrated smartphone and tablet holder where you can keep your smartphone or tablet safe. The smartphone and tablet holder fits all devices, from small smartphones to large tablets, and is quick and easy to adjust. The smartphone and tablet holder can be removed so that the performance monitor can be attached to the end of the handlebar rail. The BikeErg comes from a company with over 40 years of experience in manufacturing innovative, high quality products. No matter what type of indoor cycling workout you're after, whether you're looking to get fit or gain a head start on your next race, the Concept2 BikeErg is the perfect piece of equipment for you.
Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
For use on all BikeErgs. This is the internal cable and sensor on the BikeErg, that goes from the flywheel to the generator. -
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
T27 6-Lobe driver required to assemble & tighten most screws and fasteners on Concept 2 machines since 2015. Use only with 6-lobe Torx screws & fasteners. -
For use on all BikeErgs. -
BikeERG fit guide/sizing chart LOW seat retrofit assembly – PN 2855. This will change the seat height range to 28.75 in–38 in (73 cm–97 cm). Suitable for inside leg measurements between 26 in–35 in (66 cm–89 cm).u.Warranty
Concept2 BikeErgs are backed by a limited 2-year and 5-year warranty. Complete warranty information can be found here: BikeErg Warranty(PDF) -
6mm L-Key (or Allen Key) for use in assembling and maintaining the Concept 2 BikeERG
