-
FREE SHIPPINGFor use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916).
-
FREE SHIPPINGFor use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower.
-
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used.
-
FREE SHIPPINGFREE SHIPPING Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight.
-
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf
-
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1248 Screw 1/4 – 20 x 3/4 SS Buttonhead C/D/E; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG -
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part.
-
FREE SHIPPINGRetrofit Kit for Model C and D Rowers Includes: · PM5 Monitor · Two D cell batteries · Smartphone cradle · Monitor arm and hardware
-
FREE SHIPPINGThis is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery.
-
FREE SHIPPINGReplacement cable for the BikeERG PM5
-
FREE SHIPPINGFor use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. Important Note: This is the double coil generator sensor for Model D/E machines made after October 2006. For machines made before then, you will need to replace the entire Power Generator Assembly
-
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
FREE SHIPPINGFREE SHIPPING For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
-
FREE SHIPPINGFor use on the black SkiErg manufactured August 2014–present. These cords connect the handles to the drive spools inside of the SkiErg frame. Inspect the handle cords regularly and replace them when they appear worn. Consult the owner´s manual for more information on cord wear.
-
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) This product is for the Concept2 RowERG. Select the link for BikeERG or SkiERG [The PM5 default setup is for Model D/E/RowERG. It requires a pre-dispatch programming adjustment to use with BikeERG or SkiERG] Model D, Model E, and Dynamic Indoor Rowers from October 2014 to present SkiErgs from September 2014 to present Retrofittable to all older Concept2 Indoor Rowers, BikeERGS and SkiERGs
-
FREE SHIPPING
FREE SHIPPING
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24" instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually.