Spare parts for Oars, RowERGs, BikeERGs and SkiERGs
-
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1248 Screw 1/4 – 20 x 3/4 SS Buttonhead C/D/E; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG -
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
FREE SHIPPING
FREE SHIPPING
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24" instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually. -
FREE SHIPPINGFREE SHIPPING For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
-
FREE SHIPPINGFor use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic
-
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
-
FREE SHIPPINGReplacement cable for the BikeERG PM5
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used.
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916).
-
FREE SHIPPINGThis is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery.
-
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf
-
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower.
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG.
-
FREE SHIPPINGFor use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower.
-
FREE SHIPPINGFREE SHIPPING Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight.