Spare parts for Oars, RowERGs, BikeERGs and SkiERGs
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916).
-
FREE SHIPPINGReplacement cable for the BikeERG PM5
-
FREE SHIPPINGFor use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.
-
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG.
-
FREE SHIPPINGFREE SHIPPING For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
-
FREE SHIPPING
FREE SHIPPING
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24" instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually. -
FREE SHIPPINGReplacement sensor unit and housing for the BikeERG
-
FREE SHIPPINGFor use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic
-
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
FREE SHIPPINGFREE SHIPPING Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight.
-
FREE SHIPPINGFor use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower.
-
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part.
-
Out of stockFor use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut.
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGThis is a replacement LCD and housing front for the PM5 monitor. If your LCD is cracked or damaged, you can replace it with this replacement part. Compatible with PM5 monitors only. PM5 LCD Replacement Instructions
-
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) RowERG, SkiERG & BikeERG compatible - PLEASE NOTIFY US WHICH ERG (ergo-meter) IT IS INTENDED FOR IN CHECKOUT 'COMMENTS' [The PM5 default setup is for Model D/E/RowERG. It requires a pre-dispatch programming adjustment to use with BikeERG or SkiERG] Model D, Model E, and Dynamic Indoor Rowers from October 2014 to present SkiErgs from September 2014 to present Retrofittable to all older Concept2 Indoor Rowers, BikeERGS and SkiERGs
-
FREE SHIPPINGRetrofit Kit for Model C and D Rowers Includes: · PM5 Monitor · Two D cell batteries · Smartphone cradle · Monitor arm and hardware
-
FREE SHIPPINGFREE SHIPPING For use with RowERG, Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. If your monitor lights up with zeros, but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part. Replacement Instructions (also available at concept2.co.uk/service):
-
FREE SHIPPINGFREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject of RowERGs and Tall legs