-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram -
It's hard. It's black. It's not plastic. That's good. And contains 500,000,000 micro-mililitres of powered up H2O. In other words - it's a 500ml steel bottle for your water. Get one. Forget it somewhere - Buy another. -
For use with PM3s and PM4s installed on indoor rowers. The paper-free way to keep track of your training, this smart card captures your workout data directly from the Performance Monitor. NOT COMPATIBLE WITH THE PM5. -
This is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery. -
5cm adjustment handle without grip cover. For use on sculls and skinny straps with the Concept2 5cm adjustment system. -
One full rake of scull bushings for 13mm pins. Bushings are sold in units called rakes. Each rake of pitch bushings is enough for two oarlocks. Bushings allow for pitch adjustment anywhere from one to seven degrees. -
Sweep collar for use with green or black Concept2 sleeves. -
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). -
For use on all BikeErgs. This is the internal cable and sensor on the BikeErg, that goes from the flywheel to the generator. -
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
Replacement 5 cm adjustable outside sweep grip made of microfibre suede. For use on Ultralight sweeps that feature the Length Adjustment System. 37 mm diameter. -
Out of stock
Concept 2 Sculling oarlock -
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower. -
Out of stock
This is the saddle for the BikeERG! -
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf -
This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement -
For use on the black SkiErg manufactured August 2014–present. This is the drive spool (the drive cord is not included). Two drive spools per machine. -
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG. -
For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut.
