• SkiErg Handle and Plug Assembly (pair)

    14.75 (ex VAT 11.99)

    Only 2 left in stock

    Add to basket Details
  • Shock Cord—SkiErg2

    4.00 (ex VAT 3.25)
    • Available on fixed composite handles and with our Length Adjustment System
    • 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
    • 43 mm inside hand diameter
    • Firm, smooth texture
    • Most durable, easy to clean
    • Available on fixed composite handles and with our Length Adjustment System
    • 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
    • 43 mm inside hand diameter
    • Firm, smooth texture
    • Most durable, easy to clean

    In stock (can be backordered)

    Add to basket Details
    • Available on fixed composite handles and with our Length Adjustment System
    • 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
    • 43 mm inside hand diameter
    • Firm, smooth texture
    • Most durable, easy to clean

    In stock (can be backordered)

    Add to basket Details
    • Available on fixed composite handles and with our Length Adjustment System
    • 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
    • 43 mm inside hand diameter
    • Firm, smooth texture
    • Most durable, easy to clean
  • For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower.

    Only 5 left in stock

    Add to basket Details
  • Tractor Seat

    145.00 (ex VAT 117.89)
    Aimed at adaptive athletes, the Concept2 Tractor Seat is an alternative sliding seat available for Concept2 Indoor Rowers Models A, B, C, D, E and RowERG Standard & Tall Legs. It features:
    • A wider, more stable base for people who need more support while rowing.
    • A larger size that makes getting on and off the indoor rower easier.
    • Easy installation using thumb screws.
      For more information on the Tractor Seat, please call 087 768 0636 Note: When using proper rowing technique, range of motion is limited when leaning back on the Tractor Seat at the end of the drive.

    Only 3 left in stock

    Add to basket Details
  • RowERG Device Holder Retrofit Kit

    43.00 (ex VAT 34.96)
    FREE SHIPPING. The Device Holder Retrofit Kit (which comes as standard on all New RowERGs) includes a monitor arm with an integrated device holder that will fit most smartphones and tablets.
    • The vertical clamping range of the device holder is 3–9 inches (7.5–23 cm). This fits most smartphones and tablets, including the 12.9 inch iPad Pro.
    • Compatible with most device cases.
    • Holds your device securely in place.
    • Adjustable lower bracket makes it easy to switch between devices.
    • Pivoting monitor arm lets you adjust your viewing angle.
    • Compatible with the Model C, Model D and Model E rowing machines. The Device Holder comes as Standard with New RowERGs (Standard & Tall)
  • Power Generator Assembly

    34.00 (ex VAT 27.64)
    FREE SHIPPING For use with RowERG, Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. If your monitor lights up with zeros, but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part. Replacement Instructions (also available at concept2.co.uk/service):  

    Only 2 left in stock

    Add to basket Details
  • Sensor Coil

    32.00 (ex VAT 26.02)
    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. Important Note: This is the double coil generator sensor for Model D/E machines made after October 2006. For machines made before then, you will need to replace the entire Power Generator Assembly

    Only 4 left in stock

    Add to basket Details
  • SkiErg Handle Cord, Pair—SkiErg2

    50.00 (ex VAT 40.65)
    For use on the black SkiErg manufactured August 2014–present. These cords connect the handles to the drive spools inside of the SkiErg frame. Inspect the handle cords regularly and replace them when they appear worn. Consult the owner´s manual for more information on cord wear.

    Only 2 left in stock

    Add to basket Details
  • RowERG Tall Leg Retrofit Kit

    270.00 (ex VAT 219.51)
    FREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject  of RowERGs and Tall legs

    Only 4 left in stock

    Add to basket Details
  • Retrofit Kit for Model C and D Rowers Includes: ·         PM5 Monitor ·         Two D cell batteries ·         Smartphone cradle ·         Monitor arm and hardware

    Only 1 left in stock

    Add to basket Details
  • BikeErg Toe Clips

    15.00 (ex VAT 12.20)
  • BikeErg Water Bottle Holder

    15.00 (ex VAT 12.20)
  • Indoor Rower Handle with Grips

    36.00 (ex VAT 29.27)
    FREE SHIPPING Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight.

    Only 1 left in stock

    Add to basket Details
  • Concept2 RowERG with Tall Legs

    1,270.00 (ex VAT 1,032.52)
    FREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order). The dependable performance of the Concept 2 Model D RowErg has made it the best selling indoor rower in the world. Recognized by competitive rowers as the standard for indoor training, the Model D delivers an effective cardiovascular workout that will increase your fitness level and tone your physique. At a fraction of the cost of other home fitness equipment or a yearly gym membership, you can have the luxury of working out in your home whenever you choose…and get a great workout to boot. We value practical design: the Model D is efficiently engineered and will last a lifetime. The Model D you buy is the same machine used by Olympic- and elite-level athletes to train for their sport—it’ll take the abuse of heavy training day after day. If you’re looking for a solid piece of exercise equipment at a great value, the Model D is the perfect choice. NEW: The Concept2 RowErg is available with either standard or tall legs. The standard legs give a 14 inch (36 cm) seat height while the taller legs make the seat 20 inches (51 cm) from the floor. The tall leg option replaces the Model E, which is now discontinued. A higher seat is not required for taller users, and both machines will fit inseams up to 38 inches (96.5 cm). Rowers with an inseam longer than this may require an extra-long monorail. The tall legs are also available as a separate retrofit kit.

    Only 5 left in stock

    Add to basket Details
  • Floor Mat for BikeErg

    52.00 (ex VAT 42.28)
    FREE SHIPPING The BikeErg Floor Mat is made out of 4.5 mm thick black rubber and measures 150 cm by 80 cm. The mat can be used on any surface and helps protect the floor as well as eliminate slippage

Title

Go to Top