-
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Four per machine. -
For use on Compression Members with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
Nut #10 SS (Flywheel cover nut) [for PN1276] -
For use on all PM4 and PM5 monitors. This thumbscrew enables you to remove the battery door without tools. -
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. -
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately) -
For use on all BikeErgs crank arms. Two per crank arm -
The elastic replacement shock cord (or bungee cord) for Slides - two required per slide. -
This is a replacement battery door for the PM5. -
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. -
For use with RowErgs, Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. -
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. -
For use on SkiErgs manufactured from August 2014–present. Used at the top bracket and frame cap. There are 4 of part PN2834 in the SkiErg. SkiErg Schematics -
Chain Idler Pulley
-
6mm L-Key (or Allen Key) for use in assembling and maintaining the Concept 2 BikeERG -
For use with model C, D and E RowErgs. -
T27 6-Lobe driver required to assemble & tighten most screws and fasteners on Concept 2 machines since 2015. Use only with 6-lobe Torx screws & fasteners.
