Spare parts for Oars, RowERGs, BikeERGs and SkiERGs
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). -
FREE SHIPPINGReplacement cable for the BikeERG PM5 -
FREE SHIPPINGFREE SHIPPING For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 60cm/24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. -
FREE SHIPPING
FREE SHIPPING
This footstrap will only work for indoor rowers made after July 21, 2006. If your indoor rower was made before July 21, 2006, order P/N 1501 Footstrap (Single) Model A, B, C & Early D - 60cm/24" instead. Replacement nylon footstrap with buckle, approximately 75cm long by 2.5cm wide, with a screw hole drilled approximately 23cm from the buckle end. Two pieces per rowing machine. Sold individually. -
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
FREE SHIPPINGReplacement 5 cm adjustable grip made of azure blue rubber with longitudinal ribs. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 36 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
FREE SHIPPINGReplacement 5 cm adjustable grip made of cellular foam. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 35 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
FREE SHIPPINGReplacement 5 cm adjustable grip made of ice blue rubber with longitudinal ribs. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 33.5 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
FREE SHIPPINGFREE SHIPPING Replacement handle for the Model D, E and Dynamic Indoor Rowers. Over-moulded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. The handle measures 48.26cm (19") long and features an ergonomic 10-degree bend. This slight angle, combined with the overall handle shape, simulates the arm position of on-water rowing and provides a comfortable rowing position throughout the rowing stroke. The handle is molded of glass-reinforced nylon providing additional strength without additional weight. -
FREE SHIPPINGFor use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. -
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. -
FREE SHIPPINGFREE SHIPPING. Delivery within 5 working days of Purchase/Dispatch (unless on back-order) RowERG, SkiERG & BikeERG compatible - PLEASE NOTIFY US WHICH ERG (ergo-meter) IT IS INTENDED FOR IN CHECKOUT 'COMMENTS' [The PM5 default setup is for Model D/E/RowERG. It requires a pre-dispatch programming adjustment to use with BikeERG or SkiERG] Model D, Model E, and Dynamic Indoor Rowers from October 2014 to present SkiErgs from September 2014 to present Retrofittable to all older Concept2 Indoor Rowers, BikeERGS and SkiERGs -
FREE SHIPPINGRetrofit Kit for Model C and D Rowers Includes: · PM5 Monitor · Two D cell batteries · Smartphone cradle · Monitor arm and hardware -
FREE SHIPPINGFREE SHIPPING For use with RowERG, Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. If your monitor lights up with zeros, but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to replace this part. Replacement Instructions (also available at concept2.co.uk/service): -
FREE SHIPPINGFREE SHIPPING Transform your Model D or RowERG into a higher rowing machine. Grab those extra 150mm in height without wearing heels! Check out Concept2 FAQ on the subject of RowERGs and Tall legs -
FREE SHIPPINGFor use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. Important Note: This is the double coil generator sensor for Model D/E machines made after October 2006. For machines made before then, you will need to replace the entire Power Generator Assembly -
FREE SHIPPINGThis is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery. -
FREE SHIPPINGUse on all black SkiErgs manufactured from August 2014 to present, or any gray SkiErgs that have already been retrofitted with this grip. Contains two handles and two plugs. Instructions for the correct exchange of grips can be found here: (SkiErg 2) https://www.concept2.de/files/pdf/us/skierg/skierg2_instrux_handle_replace.pdf -
FREE SHIPPINGFor use on the black SkiErg manufactured August 2014–present. These cords connect the handles to the drive spools inside of the SkiErg frame. Inspect the handle cords regularly and replace them when they appear worn. Consult the owner´s manual for more information on cord wear. -
FREE SHIPPINGSelf-adhesive microfiber handle cover 125mm x 229mm for quick and easy replacement. For Ultralight and Skinny oars. Sold individually. -
FREE SHIPPINGSuede Replacement Patch for THIN 32mm Scull Grip -
FREE SHIPPINGFREE SHIPPING Aimed at adaptive athletes, the Concept2 Tractor Seat is an alternative sliding seat available for Concept2 Indoor Rowers Models A, B, C, D, E and RowERG Standard & Tall Legs. It features:- A wider, more stable base for people who need more support while rowing.
- A larger size that makes getting on and off the indoor rower easier.
- Easy installation using thumb screws.
