Spare parts for Oars, RowERGs, BikeERGs and SkiERGs
-
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
-
1238 Screw, 6-lobe, 1/4-20 x 3/8; This is the handle hook screw on the Model C, D and E Indoor Rower.
1253 Screw, 6-lobe, 1/4-20 x 5/8, epoxy; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.1201 6-LOBE T-27 1/4-20 X 3/4 SS PATCHED; Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
1248 Screw 1/4 – 20 x 3/4 SS Buttonhead C/D/E; Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
1231 Screw, 6-lobe, 1/4-20 x 1/2, epoxy; Used in various places on the Model C, D and E Indoor Rower.
2233 Screw 6 Lobe 1/4 – 20 x 3/4 SS Epoxy Patch; Used to attach front legs to the main body of the RowERG 1299 6 Lobe Screw 1/4 - 20 x 1/2 SS; Used in various places on the Model C, D and E Indoor Rower and BikeERG -
FREE SHIPPINGThis is the damper for the Black RowERG, Model D Model E Indoor Rower.
-
FREE SHIPPINGThis is the damper-side cover for the Black RowERG, Model D Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276).
-
FREE SHIPPINGRetrofit Kit for Model E Rowers Includes: · PM5 Monitor · Two D cell batteries · Device Holder · Monitor arm and hardware
-
FREE SHIPPINGFor use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic
-
FREE SHIPPINGFor use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
-
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.
-
FREE SHIPPINGFor use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.
-
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies and two required for P/N 1101 Hanger Shaft, threaded. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Two P/N 1243 Hex Cap Screw (For hanger shafts) may be required. For master schematics of all model indoor rowers, visit Manuals and Schematics.
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGThis is a replacement case back for the PM5 monitor. It includes the battery contacts. Compatible with PM5 monitors only.
-
FREE SHIPPINGReplacement sensor unit and housing for the BikeERG
-
FREE SHIPPINGThis is a replacement LCD and housing front for the PM5 monitor. If your LCD is cracked or damaged, you can replace it with this replacement part. Compatible with PM5 monitors only. PM5 LCD Replacement Instructions
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower and RowERG.
-
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 82mm (3.25") wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used.
-
FREE SHIPPINGReplacement cable for the BikeERG PM5
-
FREE SHIPPINGFor use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916).
-
FREE SHIPPINGFor use with Model C, D and E Indoor Rowers & RowERG. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part.
-
FREE SHIPPINGThis is the 380cm (12´ 6") long elastic shock cord (or bungee cord) that recoils the chain on recovery.