Concept 2 Spare parts for Sweep Oars & Sculls
-
FREE SHIPPINGHigh quality 10x13mm Spanner or Rigger Jigger -
FREE SHIPPING5cm adjustment handle without grip cover. For use on sculls and skinny straps with the Concept2 5cm adjustment system. -
Concept 2 Sculling oarlock -
This is the nut that keeps the gate closed on a Concept2 oarlock. Fits scull and sweep oarlocks. -
One full rake of scull bushings for 13mm pins. Bushings are sold in units called rakes. Each rake of pitch bushings is enough for two oarlocks. Bushings allow for pitch adjustment anywhere from one to seven degrees. -
SCULL Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
SWEEP Oarlock Universal Bushing, 13mm, Blue (Two required per oarlock)
-
FREE SHIPPINGPadded Oar bag/cover for 1 pair of sculling oars- Material: Nylon
- Carrying handles
- Separate compartments for each oar
- Velcro closing
-
FREE SHIPPINGPair of replacement shoe levers for small or large shoes. Large shoe levers are Yellow Small shoe levers are Blue -
FREE SHIPPINGPair of replacement shoe levers for small or large shoes. Large shoe levers are Yellow Small shoe levers are Blue
-
FREE SHIPPINGPair of replacement shoe levers for small or large shoes. Large shoe levers are Yellow Small shoe levers are Blue -
- Adjustable replacement handle (5cm) made from contoured orange rubber. Finger-sized radial contours and brushed texture. Solid, durable material. Available in two diameters: 32mm (thin) or 33.5mm (medium). Available separately.
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available on fixed composite handles and with our Length Adjustment System
- 32–39 mm outside hand diameter, depending on handle and shaft (see chart)
- 43 mm inside hand diameter
- Firm, smooth texture
- Most durable, easy to clean
-
- Available with our Length Adjustment System only
- 37 mm outside hand diameter
- 40 mm inside hand diameter
- Soft, suede-like texture
- Adhesive-backed synthetic suede grip layer
- Easy and inexpensive to replace; no tools required
- Requires more frequent replacement than our other grip option
-
Replacement 5 cm adjustable grip made of azure blue rubber with longitudinal ribs. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 36 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
Replacement 5 cm adjustable grip made of cellular foam. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 35 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
Replacement 5 cm adjustable grip made of ice blue rubber with longitudinal ribs. For use on sculls and Skinny sweeps that feature the Length Adjustment System. 33.5 mm diameter. Not for use with Ultralight sweeps or fixed length oars. Important: You will need a T20 6-Lobe driver (available from hardware shops) or Oar Rigging Tool (available here) to install and adjust these grips. -
FREE SHIPPINGOuter diameter Ø 41.5 mm Smooth Green Rubber Suitable for oars with the Length Adjustment System or fixed handle -
The Oar Rigging Tool includes the following:- T20 Torx Driver for adjusting:
- The grip clamp screw
- The length adjustment screw on suede scull grips
- 6 mm Hex Nut Driver, for adjusting the length adjustment screws on adjustable grips (excluding the suede scull grip)
- #2 Phillips Bit for adjusting:
- Older grip clamp screws
- Length on older oars
- 5/16" Hex Nut Driver for adjust the collar band clamp
- T20 Torx Driver for adjusting:
-
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools. -
Scull collar for use with green or black Concept2 sleeves. -
Replacement grip for sculling oar handles. Azure blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
Replacement grip for sculling oar handles. Made of smooth, black rubber. Fits wood handles, bonded composite handles, or old style 10 cm adjustable-length handles. -
Replacement grip for sculling oar handles. Ice blue rubber with longitudinal ribs. Fits wood handles, bonded composite handles, or old style 10cm adjustable-length handles. -
Self-adhesive microfiber handle cover 125mm x 229mm for quick and easy replacement. For Ultralight and Skinny oars. Sold individually. -
Suede Replacement Patch for MEDIUM 33.5mm Scull Grip -
A self-adhesive microfibre suede patch for replacing the suede on an outside 5 cm adjustable sweep grip. For use on Skinny and Ultralight sweeps that feature the Length Adjustment system. -
Suede Replacement Patch for THIN 32mm Scull Grip
-
For use with green or black sleeves, our CLAM (short for "Clip-on Load Adjusting Mechanism") is a 1 cm thick shim that clips onto your oar sleeve next to the collar, allowing you to quickly and easily adjust load without any tools. -
Sweep collar for use with green or black Concept2 sleeves.
-
Replacement 5 cm adjustable outside sweep grip made of microfibre suede. For use on Ultralight sweeps that feature the Length Adjustment System. 37 mm diameter.
